Cart 0

2025 LM Show Christmas Print Drive - Printing Guidelines

 

Thank you for your support and participation in what is shaping up to be our biggest and most exciting Christmas Print Drive yet!

We welcome everyone to take part. Whether you have a single printer or an entire setup, you can download our models, print toys you’ll be proud of, and send them in to be included.

With your printers and skills, together we’ll bring joy, wonder, and smiles to children and families in need all around the world this holiday season.

Please read this page completely before continuing.

Quality & Safety

This is one of the most important aspects of the LM Show Christmas Print Drive. We want to proudly represent the 3D printing community to the world, and that means staying focused on the safety and quality of the toys we gift. These toys will end up in the hands of families and children, and they should be the very best that our community can produce.

We’ve included photos you can use as a reference for quality standards. If you ever have questions or doubts, please reach out, visit our discord — or join us live on The LM Show to chat, learn, and help others improve their printing skills.

Twitch Stream: https://twitch.tv/loyalmoses

Discord: https://loyal.ms/discord

The most important thing to remember, because we as a community are spending so much time, energy and cost on this print drive: we don't want to ship poor-quality prints half-way around the world!

Filament

We want everyone who participates to be able to select the filaments that they are most comfortable, and successful with.

We would prefer prints to be PLA, PLA Pro, ABS / ASA, however PETG and TPU are also acceptable if the quality of the prints maintain the high level of quality that we need for this community print drive.

The important thing to remember, the prints need to be first and foremost safe and to represent our community with quality.

Printing

This is where the magic happens! This is the most complex component of the project, and we are sincerely grateful for your willingness to dedicate print time and filament to help share joy around the world.

We have selected and approved the following designs for this print drive. If you have a design you'd like reviewed, please ensure it meets the requirements here before contacting us for review.

General Print Guidelines for ALL approved STLs

Because gift packages to families and children may contain more than one toy, we need all prints regardless of who prints or the printer it is printed on to be of the same relative quality and to meet our high standards.

Required

  • .3 layer height or less
  • 2 perimeters or more
  • 4 bottom layers or more
  • 4 top layers or more
  • 12% infill or more
  • No supports
  • SILK Filaments (add 2 perimeters and add 5% to infill)

Recommended

  • .2 layer height
  • 3 perimeters
  • 5 bottom layers
  • 5 top layers
  • 15% infill
  • No supports
  • SILK Filaments (double perimeters and add 10% to infill)

Prints

These are the prints we have accepted so far! Please pay attention to the print requirements, as scale may need to be adjusted in order to print the proper size for safety and uniformity.

Remember, these toys will represent our community, and we want them to be the absolute best that our community can offer!

Thank you so much for your willingness to participate! You are quite literally going to be putting smiles on the faces of families and children worldwide.

Check back for updates as we add or remove models!

Start printing RIGHT here!

Printables: https://loyal.ms/2025_printables

MakerWorld: https://loyal.ms/2025_makerworld

THANK YOU & GET PRINTING!